Power electronics for equipment manufacturers & integratorsinfo@voluxin.com+86 15957148220
Request a Quote ↗

VOLUXIN · POWER & BATTERY MANAGEMENT

Engineering resources

Selection guides, English product overviews and project requirements.

BA48-MNS11 — BMS catalogue reference
350V DC-DC Converter Range — DC-DC catalogue reference

VOLUXIN ENGINEERING REFERENCE

PCB DFM input checklist

Fabrication revision, stack-up, drill definitions and inspection requirements.

← All engineering references

Download CSV

Read the table below. On small screens, scroll horizontally to view every column. Download the CSV to edit a worksheet in your spreadsheet application.

PCB DFM input checklist — Revision 2, 5 October 2026
Review itemRequirement to specifyYour target / notes
Data identityBoard revision; file manifest; Gerber/agreed format; drill data; fabrication notesTo be provided by customer
ConstructionLayer sequence; laminate requirements; dielectric spacing; finished thickness/toleranceTo be provided by customer
CopperStarting/finished copper by layer; power routes; plated-copper needsTo be provided by customer
GeometryOutline; dimensions/tolerances; slots; edge features; panel arrangementTo be provided by customer
HolesPTH/NPTH; finished sizes/tolerances; drill definitions; via structuresTo be provided by customer
HDI reviewBuild-up stages; microvia connections; filling/capping; lamination sequenceTo be provided by customer
ImpedanceNets; target values/tolerances; reference layers; coupons and report scopeTo be provided by customer
Finish and markingSurface finish; solder mask; legend; exposed-pad and contact requirementsTo be provided by customer
Acceptance scopeApplicable acceptance criteria; optical/electrical checks; sampling and reportsTo be provided by customer
Quote planningPrototype/production quantity; delivery destination; requested scheduleTo be provided by customer
Change approvalData revision freeze; proposed substitutions; deviation approval responsibilityTo be provided by customer

VOLUXIN | Rev 2 | 2026-10-05 | Customisation requirements worksheet; targets are customer inputs, not confirmed product specifications or test results.

Custom PCB fabrication: prepare a design-specific manufacturing brief

For multilayer or HDI bare PCB manufacturing, specify the construction and inspection scope along with the design files. Begin with a non-confidential summary and agree a suitable exchange for proprietary fabrication data.

Discussion topicWhat to specify
Stack-up and materialsIdentify layer sequence, laminate requirements and copper distribution.
Holes and board geometrySupply finished-hole tolerances, plated/non-plated definitions and outline dimensions.
Controlled impedanceName the nets, target values, tolerances, reference layers and required records.
Finish and inspectionSpecify finish, mask, marking and the applicable electrical or dimensional checks.

Selection trade-off

Fine features, complex via structures and tighter tolerances can change process requirements. Compare fabrication quotations against the same approved data revision and inspection scope.

Continue the selection guide

Industry reading: Epec PCB fabrication data requirements. Source documents inform the review topics; their product ratings, certifications and capabilities are not VOLUXIN specifications.

Request a Custom PCB Review

Catalogue references and blank worksheets support project discussions. They are not configuration-specific engineering specifications or completed test records.

Discuss Your Requirements