Power electronics for equipment manufacturers & integratorsinfo@voluxin.com+86 15957148220
Request a Quote ↗

VOLUXIN · POWER & BATTERY MANAGEMENT

DC-DC Module vs Enclosed Converter: Selection Guide

BMS and DC-DC component supply for equipment manufacturers and integrators.

350V DC-DC Module Range — DC-DC catalogue reference
350V DC-DC Converter Range — DC-DC catalogue reference

POWER & BATTERY MANAGEMENT

DC-DC Module vs Enclosed Converter: Selection Guide

Published by VOLUXIN · Updated 30 September 2026. General selection guidance; the agreed configuration-specific documents govern an order.

A power module and an enclosed DC-DC converter are different construction choices. Select the construction around the equipment integration, then confirm the electrical option and operating conditions. The housing label does not establish efficiency, isolation, cooling capability or environmental protection.

Compare the integration questions

Review area Power module Enclosed converter
Mechanical design Request the module outline, fixing points, clearances and host arrangement. Request the enclosure envelope, fixing points and service/access requirements.
Thermal arrangement Define the module-to-host heat path and any required mounting interface. Review heat transfer from the enclosure and the permitted installation conditions.
Connections Confirm the supplied terminals or leads and any host interconnect requirements. Confirm connector/lead arrangement, cable access and interface location.
Environmental requirements Identify what protection the host assembly must provide. Ask for a stated enclosure rating if required; do not infer one from the image.
Ordering identity Record the voltage platform, JCDCS reference and required options. Record the voltage platform, JCDCC reference and required options.

Use the same voltage window for a fair initial comparison

The 72V module and 72V enclosed converter catalogue ranges both state 50–100V input, 14V/27.5V output options and 1.0–2.0kW rated-power entries. Similar electrical catalogue entries do not mean the mechanical arrangement or complete configurations are interchangeable.

Check differences rather than assuming equivalence

The 350V module catalogue contains a 70V output option, while the 350V enclosed series lists 72V for its corresponding high-output entry. Likewise, the 800V enclosed catalogue includes a 51V option with a different input window; that option is not listed in the 800V module overview. Use the actual model table on each page.

Prepare the choice for review

Send the equipment mounting area, available space, expected ambient conditions and connection requirements with the electrical brief. Ask what is included in the supplied assembly and what remains the equipment integrator’s responsibility. Confirm a dimensioned drawing and operating limits before treating either construction as a drop-in component.

Common questions

Is an enclosed converter always easier to install?

That depends on the equipment and supplied interfaces. Review the actual mounting, connections and thermal arrangement; the construction name alone cannot settle installation effort.

Can a module be fitted without a thermal review?

The published rated power does not remove the need to confirm operating conditions. Discuss the applicable mounting, cooling and derating requirements for the selected configuration.

Continue with the DC-DC specification guide or browse DC-DC modules and converters.

Tell us what your equipment needs.

Share your application, product requirements and any details you have already confirmed. We can then discuss the available options.

Discuss Your Requirements