Power electronics for equipment manufacturers & integratorsinfo@voluxin.com+86 15957148220
Request a Quote ↗

VOLUXIN · POWER & BATTERY MANAGEMENT

Engineering resources

Selection guides, English product overviews and project requirements.

BA48-MNS11 — BMS catalogue reference
350V DC-DC Converter Range — DC-DC catalogue reference

VOLUXIN ENGINEERING REFERENCE

PCB fabrication reference matrix

2026 fabrication entries with project approval boundaries; excludes future capability plans.

← All engineering references

Download CSV

Read the table below. On small screens, scroll horizontally to view every column. Download the CSV to edit a worksheet in your spreadsheet application.

PCB fabrication reference matrix — Revision 1, 2 October 2026
Construction2026 source referenceProject approval requirement
Through-hole multilayerUp to 28 layers; finished thickness 0.5-4.5 mm; copper 1/3-6 ozApprove stack-up, material and copper combination
Through-hole geometryInner 2/2 mil; outer 2.3/2.3 mil trace/space; minimum drill bit 8 milDrill bit size is not finished plated hole size; review finished hole and tolerances
Through-hole materialsFR-4; mid/high Tg; high-CTI/halogen-free entriesApprove exact laminate grade and supply
Through-hole finishOSP; immersion gold; lead-free HASL; gold fingers; carbon ink entriesApprove selected finish and applicable thickness
HDIUp to 14 layers; 1-3 build-up stages; thickness 0.3-2.4 mmApprove via structure, stack-up and build-up sequence
HDI geometryInner/outer 2/2 mil trace/space; minimum through-hole drill bit 0.15 mmReview design-specific manufacturability
InspectionAOI/visual; bare-board electrical test; impedance and microsection processes documentedAgree methods, sampling, applicable criteria and reports
Scope2026 fabrication reference pp.24-25; future plans omittedLimits are not necessarily simultaneously achievable; quotation controls scope

VOLUXIN | Rev 1 | 2026-10-02 | Catalogue / procurement reference; final configuration and operating conditions require project approval.

Custom PCB fabrication: prepare a design-specific manufacturing brief

For multilayer or HDI bare PCB manufacturing, specify the construction and inspection scope along with the design files. Begin with a non-confidential summary and agree a suitable exchange for proprietary fabrication data.

Discussion topicWhat to specify
Stack-up and materialsIdentify layer sequence, laminate requirements and copper distribution.
Holes and board geometrySupply finished-hole tolerances, plated/non-plated definitions and outline dimensions.
Controlled impedanceName the nets, target values, tolerances, reference layers and required records.
Finish and inspectionSpecify finish, mask, marking and the applicable electrical or dimensional checks.

Selection trade-off

Fine features, complex via structures and tighter tolerances can change process requirements. Compare fabrication quotations against the same approved data revision and inspection scope.

Continue the selection guide

Industry reading: Epec PCB fabrication data requirements. Source documents inform the review topics; their product ratings, certifications and capabilities are not VOLUXIN specifications.

Request a Custom PCB Review

Catalogue references and blank worksheets support project discussions. They are not configuration-specific engineering specifications or completed test records.

Discuss Your Requirements