POWER & BATTERY MANAGEMENT
What to Include in a Custom PCB Fabrication Quote Request
A custom PCB fabrication quote is easier to review when the board files, revision, material, stackup and inspection requirements describe the same design. Start with the information you have and identify open questions. This guide covers bare PCB fabrication.
Start with the information available
For a preliminary enquiry, provide the board dimensions, expected layer count, approximate quantity, material or operating requirements if known, and requested schedule. Identify unknowns. An initial estimate may change after a complete design and DFM review.
Before fabrication, agree the complete revision-controlled data package, stackup, manufacturing notes and inspection requirements. Resolve discrepancies with the fabricator before the design is approved for production.
Prepare the fabrication data
Provide the agreed fabrication file format, board outline and drill data, with a clear revision identifier. Include the layer stackup and a fabrication drawing or notes that explain requirements not clear in the data. Agree accepted formats with the fabricator.
Make sure layer names, drill information and drawing revisions correspond and that data layers align. Provide a machine-readable board profile and cutouts. Distinguish plated and non-plated holes, slots and any blind or buried via spans. Clarify units, finished hole sizes and tolerances. A drawing is useful for dimensions and notes but does not replace fabrication data.
The Ucamco Gerber specification describes layer alignment and drill data for its specified format. Check the actual format and fabricator requirements rather than assuming every drill file has identical conventions. Provide a netlist for electrical-test comparison when requested, and flag controlled-impedance features for review.
Specify the board construction
- Board outline: dimensions, shape, cutouts and tolerances.
- Stackup: layer count, sequence, material and target thickness.
- Copper: copper weight by layer and relevant tolerances.
- Holes and vias: finished hole sizes, plating, via structure and tolerances.
- Finish: required surface finish, solder mask and legend.
- Panel: single boards or panel requirements, if known.
Distinguish a finished plated-hole requirement from a drill-bit size. For HDI structures, describe the via sequence and layer connections rather than relying only on a layer count.
Agree inspection and acceptance requirements
State whether the project needs electrical testing, controlled-impedance verification, microsections or other records. For impedance, identify the target and tolerance, relevant structures, test coupons and reporting requirements when applicable. For other inspections, specify applicable criteria and sampling. Agree the method, acceptance criteria and document requirements with the supplier. A generic checklist is not evidence that a particular test has been performed.
Include commercial and revision details
Share the intended sample and production quantities, project stage, desired schedule and delivery destination as appropriate. Identify the file revision to be quoted and how design changes will be approved. Price, lead time and feasibility depend on the complete project scope.
For confidential designs, first agree an appropriate document exchange process and, if needed, discuss an NDA. Avoid sending sensitive files before that process is agreed.
Review feasibility with VOLUXIN
VOLUXIN discusses custom multilayer and HDI bare PCB fabrication using project-specific files and requirements. Published reference entries are starting points for review; manufacturing limits cannot automatically be combined on the same board. Review the engineering support page and engineering library for the PCB DFM input checklist. The approved fabrication revision and quotation define the agreed scope.
Frequently asked questions
Can I request an initial estimate without final files?
Yes. Share known board construction, quantity and requirements, and identify missing information. The estimate and manufacturing feasibility need review against the final revision.
Is a drill-bit diameter the same as the finished plated hole?
Not necessarily. Specify finished hole size and tolerance, identify plating and confirm the data convention with the fabricator.
Are all published manufacturing limits achievable together?
Not automatically. Stackup, material, via structure and tolerances interact. Confirm the proposed combination during DFM and quotation.
Tell us what your equipment needs.
Share your application, product requirements and any details you have already confirmed. We can then discuss the available options.
Discuss Your Requirements
