Power electronics for equipment manufacturers & integratorsinfo@voluxin.com+86 15957148220
Request a Quote ↗

VOLUXIN · POWER & BATTERY MANAGEMENT

Engineering resources

Selection guides, English product overviews and project requirements.

BA48-MNS11 — BMS catalogue reference
350V DC-DC Converter Range — DC-DC catalogue reference

VOLUXIN ENGINEERING REFERENCE

BMS requirements worksheet

Pack, load duty, ports, protocol and mechanical information for a custom BMS enquiry.

← All engineering references

Download CSV

Read the table below. On small screens, scroll horizontally to view every column. Download the CSV to edit a worksheet in your spreadsheet application.

BMS requirements worksheet — Revision 2, 5 October 2026
Review itemRequirement to specifyYour target / notes
Application and packEquipment duty; chemistry; exact series count; voltage limitsTo be provided by customer
Current profileContinuous charge/discharge; peak current and duration; regenerative currentTo be provided by customer
MonitoringCell-voltage accuracy target; pack-current sensing; temperature-channel locationsTo be provided by customer
ProtectionFault thresholds; delays; disconnect and recovery behaviour to agreeTo be provided by customer
BalancingBalancing method; target current; activation conditions; heat constraintsTo be provided by customer
SOC reportingSOC accuracy target; calibration inputs; reporting interval and unitsTo be provided by customer
CommunicationCAN/RS485/UART; baud rate; message map; charger/controller ownershipTo be provided by customer
Current pathsCommon/separate ports; fuse; switching arrangement; connector pinoutTo be provided by customer
MechanicalDimensions; mounting; enclosure; harness and drawing revisionTo be provided by customer
Operating environmentTemperature; cooling; moisture/vibration exposure; relevant evaluation needsTo be provided by customer
Commercial briefEvaluation quantity; planned order quantity; destination; target dateTo be provided by customer
Approval documentsConfiguration specification; pinout; protocol; agreed sample acceptanceTo be provided by customer

VOLUXIN | Rev 2 | 2026-10-05 | Customisation requirements worksheet; targets are customer inputs, not confirmed product specifications or test results.

Custom BMS: turn your battery pack requirements into an enquiry

A custom battery management system brief defines the battery, equipment duty and controller interface together. Use the topics below to request an OEM configuration review; available functions are agreed for the proposed design.

Discussion topicWhat to specify
Monitoring and protectionSpecify cell voltage, pack current, temperature channels and required fault responses.
Balancing strategyCompare balancing needs with pack size, charge time and thermal constraints.
SOC and communicationDefine state-of-charge reporting, CAN or RS485 messages and controller responsibilities.
Mechanical integrationIdentify separate or common current paths, connectors, mounting and enclosure requirements.

Selection trade-off

A higher current rating is useful only with a defined duty cycle and heat-removal path. Select the pack and communication requirements before comparing catalogue models.

Continue the selection guide

Industry reading: TI battery-system design requirements. Source documents inform the review topics; their product ratings, certifications and capabilities are not VOLUXIN specifications.

Request a Custom BMS Review

Catalogue references and blank worksheets support project discussions. They are not configuration-specific engineering specifications or completed test records.

Discuss Your Requirements