POWER & BATTERY MANAGEMENT
BMS Cell Balancing: How to Specify a Battery Pack

BMS cell balancing manages differences between cells connected in series. To specify a battery pack, compare the balancing method, average current and available charging time alongside protection and thermal requirements.
Why does a battery pack need BMS cell balancing?
Series cells carry the same current, but capacity and self-discharge can differ. As a result, their states of charge may diverge over time. For example, the first cell to reach a protection limit can stop charging or discharging while other cells still have capacity available. However, balancing cannot repair a damaged or weak cell.
Texas Instruments explains this behavior in its BQ769x2 cell balancing application note. Its circuit and current examples apply to that device, not to every BMS.
Passive and active BMS cell balancing
Passive balancing bypasses selected cells and dissipates energy as heat. It is relatively simple, but current and heat limit how quickly it can correct imbalance. Therefore, the circuit, duty cycle and enclosure all affect performance.
In contrast, active balancing transfers energy between cells or other parts of the battery system. It may reduce energy loss but adds circuit and control complexity. Therefore, ask which method is available for the specific BMS and application. Availability must be confirmed for each project.
How long does BMS cell balancing take?
For an initial estimate, divide the charge difference in ampere-hours by the average balancing current in amperes. Suppose the difference is 1 Ah and the average current is 0.05 A: the estimate is 20 hours. This is a hypothetical example, not a product rating or guaranteed result.
In practice, actual time can be longer. For example, balancing may operate only during part of a charging or rest period. Furthermore, thermal limits or measurement intervals can reduce its duty cycle. A nominal current is not necessarily the average. Therefore, ask for the current, duty cycle and start and stop conditions used in the estimate.
Why cell voltage alone is not enough
Voltage differences can inform a balancing decision, but voltage does not always translate directly into a known state-of-charge difference. Chemistry, current, temperature and rest time matter. Lithium iron phosphate has a relatively flat voltage curve over much of its state-of-charge range. Compare readings under defined conditions and follow the cell maker’s limits. TI discusses this relationship.
What BMS cell balancing information should buyers provide?
- Cell chemistry, manufacturer, model, capacity and number of series cells.
- Charge and discharge currents, including peak duration.
- Charging profile, frequency, available balancing time and temperature range.
- Initial cell matching and measured voltage differences, with measurement conditions.
- Balancing method, communications, enclosure constraints and protection requirements.
- Required validation and acceptance criteria for the finished pack.
Use the BMS selection guide and BMS current ratings guide to prepare the rest of your specification. Share the pack details with VOLUXIN to confirm available configurations and project feasibility.
How should a balancing design be verified?
Finally, agree on a test plan before production. Record cell voltages, charge current, balancing status and temperatures over representative charging and rest cycles. Also, test with the intended enclosure and ambient conditions. Compare the results with cell supplier limits and agreed acceptance criteria. Balancing does not replace cell matching, protection or system-level safety testing.
Technical references
Texas Instruments: Cell Balancing With BQ769x2 Battery Monitors and battery balancing and state of charge. These sources describe general principles and third-party designs, not VOLUXIN product specifications.
Tell us what your equipment needs.
Share your application, product requirements and any details you have already confirmed. We can then discuss the available options.
Discuss Your Requirements

